Forums/
Kasa Smart Plugs
2021-01-14 00:07:15
@B.Will I was finally able to get a specific answer regarding the HS105, my apologies for the delay. Here is it: Relay on: 1.35W Relay off: 0.97W
1HELPFULS
Forums/
Kasa Smart Switches
2021-01-13 23:58:33
@Kerbdogy You could try moving the switch to another outlet to see if the switch is bad if the wiring has been verified in being correct.
0HELPFULS
Forums/
Deco
2021-01-13 23:46:29
@erinlscott80 If you have two more nodes, you can put one node in the garage connected via Ethernet. The second node can be placed in an area where the main node is not able to cover. For the second...
0HELPFULS
Forums/
Range Extenders
2021-01-13 23:39:04
@percc Look at the circle LED to see if it ever turns red, if so, move the extender closer to the router. As far as your computer, if you are connected via Wi-Fi, forget your main wireless network as...
1HELPFULS
Forums/
Bug Report
2021-01-13 23:37:45
@DubStepMad What is your operating system, and where did you download the tpPLC utility from?
0HELPFULS
Forums/
Deco
2021-01-13 23:35:12
@deagle311 If RDP works in AP Mode then your port forwarding rules reflect the LAN IP of your modem/router. You need to change them to point to the IP that the Deco gets from the modem/router. You...
0HELPFULS