Cable Modem&Routers
0Helpful
56Views
Hi all, I've configured openVPN and also DDNS so I can connect to my home network from outside. The big issue is that seems to me that DDNS is not working. How can I force DDNS to happen? Cheers
By
MrWhity
· Latest post 2021-09-10 07:06:25
by goldendevil
0Helpful
18Views
Please excuse my ignorance, I am really new at all of this. In a house that has Uverse with a TP-Link AC1750 router I'd like to set up a second router with a VPN behind the Uverse router. My goal is t
By
kadini
0Helpful
9Views
I am trying to set up a static route between two subnets, each separately on a router plugged into a lan port on R600.The R600 is on subnet x.x.0.0/24, and I have assigned reserved IPs for each of my
0Helpful
12Views
Hi, how do I access my SNMP settings? I can't seem to find it. or does my router doesn't have the SNMP settings? I'll appreciate the help. Thank you!
By
Jan_Ranile
· Latest post 2021-08-05 07:36:47
by albert3432
0Helpful
12Views
Hello - I am in the process of securing my home network and I was told that utilizing VLAN to segment things would be the best option. I was wondering if my TP Link Archer is capable of doing that and
By
neverwhere
0Helpful
9Views
0Helpful
16Views
Only started getting the orange light yesterday and have tried troubleshooting everything that I can. Ethernet is working fine but there's no service when connected to the WiFi.
0Helpful
10Views
In our home, we usually install a Wi-Fi extender to get complete coverage throughout the house. But we soon run—well, walk—into some problems. For instance, moving from the living room to our bedroom,
0Helpful
104Views
Moving into a new house, improving the internet I want to go with the TL-ER7206 router, but Quantum fiber internet says the router must support the following: •1 Gps Ethernet WAN port (obviously yes)
By
ScottKBerger
0Helpful
5Views
Hi all-- I had installed the usb printer controller previously, and was successful in linking my two printers. Unfortunately, I replaced one of the printers (same model) and the controller couldn't fi
By
Skidee
0Helpful
6Views
0Helpful
6Views
Hello, I found out that my router (i just placed in my room) keeps disconnect from my network every morning. I placed an switch in the other room that is connected to the tp link router (ls105g). i wi
0Helpful
8Views
I am trying to setup USB sharing via the web. I have a usb inserted and set it to share via http: and https: which all works perfectly from within my home network. However, whenever I try to access fr
0Helpful
36Views
Model : Hardware Version : Firmware Version : ISP : I have had this modem for a little over two months. For the first several weeks it was flawless, but now I need to restart it at least once a day. C
0Helpful
35Views
Have been using a TC-W7960 Modem/Router with Xfinity for the last couple of years. Recently purchased an Archer C7 (AC1750) to see if I might realize some better WiFi speeds in a small, two story hous
0Helpful
14Views
I'm replacing my 7-year old Netgear Nighthawk R7000 router with a newly purchased Archer A9. Cable modem is an Arris SB8200. The R7000 has started to drop wired connections 1-2 times a day, so it's ti
By
dlh0310
0Helpful
5Views
I have a TL-R600VPN V4. Configured like a gateway with a telecom modem attached to the WAN port. It works, Internet connection, NAT, DNS forwarding, UPnP, VPN (IPsec peer to peer & L2TP server), DHCP
0Helpful
47Views
Cant see the VR2800 on any list here... I have just installed the 2800 to replave my Sky Q hub. Its seems to work OK but I have several issues. Whenever I try and change a setting it takes ages to sav
By
topgazza1
0Helpful
4Views
Ok so Kim Komando said we needed to upgrade out firmware. After much fear and frustration I managed to get the current firmware to my download file for install. Problem 1, I don't have winzip and when
0Helpful
8Views