Forums/
Deco
2020-10-26 17:26:35
@muainimh The yellow LED may indicate it is in recovery mode as the reset may have been held for more than 10 seconds. Leave the Deco powered on for several minutes, then hold the reset for one...
0HELPFULS
Forums/
Kasa Smart Switches
2020-10-26 17:22:42
@MARKARTIS If the switch specs are correct (100 - 120VAC 60Hz, Neutral wire) and wiring double-checked, please reach out to our support
0HELPFULS
Forums/
Range Extenders
2020-10-26 16:57:02
@Dr.Rabbit Were all methods tried? https://www.tp-link.com/us/support/faq/2509/ Factory defaulting the extender by holding the reset for 15 seconds while it is plugged in?
0HELPFULS
Forums/
Deco
2020-10-26 16:43:43
@dylanb You generally should not need to do forwarding. Are the three of your phones not able to do any Wi-Fi calling? After forwarding ports for the one phone, does that now work?
0HELPFULS
Forums/
Deco
2020-10-26 16:11:51
@J.petty79 The message came with the new iOS update. If you are running the latest firmware, go to your wireless settings, then tap on the password. You will then see an option for WPA2-PSK [AES]...
1HELPFULS
Forums/
Deco
2020-10-26 16:07:00
@LadefogedT You can try swapping one of the satellite units with the main Deco to see if the main Deco could be giving the slow speeds. I'm assuming the wireless signal is likely just weakening...
0HELPFULS