Forums/
Wi-Fi Routers
2020-10-26 18:40:46
@kelg Going off of what @ArcherC8 mentioned. Log into the Archer A7, and go to Advanced > Network > DHCP Server. There you will see the IP address assigned to the respect MAC address that you can use...
0HELPFULS
Forums/
Deco
2020-10-26 18:36:17
@wifiMeshNewbie Both set up modes should be similar, but in router mode, all satellite nodes would need to connect to the main router, wherein AP mode you can have multiple nodes wired to the main...
0HELPFULS
Forums/
Deco
2020-10-26 18:08:22
@jomama341 Have you tried connecting to any of the satellite nodes? In the screenshot referenced does your computer get an IP of 192.168.68.x? Have you tried swapping the main node with one of the...
0HELPFULS
Forums/
Range Extenders
2020-10-26 18:03:26
@Bonz0 If the original signal is weak the range extender will be able to make that signal stronger. The speed, however, may increase from the stronger signal or be slower due to the extender being...
0HELPFULS
Forums/
Deco
2020-10-26 18:00:57
@11April After a recent firmware update, you are not able to connect the second Deco node to the first one? What is the current status of both LED lights, and how are they connected on your network?
0HELPFULS
Forums/
Kasa Smart Bulbs
2020-10-26 17:55:33
@Soop If you look at the power adapter itself it should mention the information you need which should match below. The barrel connector seems to be a standard 2.1mm. Please note using a different...
1HELPFULS