Knowledge Base/
Configuration
2020-11-03 19:16:54
Some ISPs require you to configure the VLAN ID for internet connection, like Singtel, Unifi, Maxis, Viettel, MEO, Vodafone, NBN, UFB, and so on. This article will guide you to configure the VLAN ID...
0HELPFULS
Knowledge Base/
Troubeshooting
2020-11-03 18:31:58
You may encounter one of the following problems or get an error code during the basic configuration of the main Deco, if you come across these issues, please refer to the below suggestions to do some...
0HELPFULS
Forums/
Wi-Fi Routers
2020-10-29 22:56:46
@AJ_Hsieh LACP will not work, you need to use something like balance xor.
0HELPFULS
Forums/
Kasa Smart Plugs
2020-10-29 22:54:48
@justyot The LED at the very least should turn on, and when fully booted after being plugged in a couple of minutes should respond when pressing the button. If neither happens, then it may have...
1HELPFULS
Forums/
Deco
2020-10-29 22:51:45
@jslateiv The Deco by default will automatically try to get an IP and internet, similar to connecting a computer to it. If you already have the Deco setup, try to switch it to Access Point Mode in...
0HELPFULS
Forums/
Wi-Fi Routers
2020-10-29 22:50:00
@Solomyr The AX connection exists on the 5G band so you may only be connecting to the 2.4G. Make sure to disable Smart Connect if you have that on also verify that the 5G is enabled in the wireless...
0HELPFULS