TonyOffline
Following: 0Followers: 54
Forums/ Apps
2020-11-03 22:16:11
Re:Deco app
@Gizmokr Make sure the Deco is not running in access point mode (Advanced > Operating Mode). In AP Mode, there are fewer options compared to router mode. If you set up the Deco with your email, then...
0HELPFULS
Forums/ Wi-Fi Routers
2020-11-03 22:10:53
Re:High latency caused by router
@nima nima wrote I have stable connection to internet, connection to router is fine (latency is less than a millisecond) and the same for the modem (latency is less than a millisecond). I connected...
0HELPFULS
Forums/ Range Extenders
2020-11-03 22:00:47
Re:Searching for solution to extend home network outdoors
@Mike_P 1. EAP225-Outdoor should do the job. 2. Yes, you would have an Ethernet cable connected to any of the Deco ports of the main Deco or one of the satellites. 3. You would run just an Ethernet...
0HELPFULS
Forums/ Wi-Fi Routers
2020-11-03 21:47:12
Re:Archer Ax10 Not Showing Client IPs assigned to MoCA devices (Ethernet over Coax Boxes)
@MelbJim If the clients pass a MAC address to the router then they should show up. If there is a virtual connection behind the MoCA devices then I would not expect the device to show up either. I can...
0HELPFULS
Forums/ Deco
2020-11-03 21:35:27
Re:Mesh turns red throughout day
@krleblanc I would start by swapping the Ethernet cable being used, as the Deco is losing the internet connection, also try a different port on the Deco and on the router. If the issue still happens,...
0HELPFULS
Forums/ Wi-Fi Routers
2020-11-03 21:12:53
Re:Reboot schedule
@natsbar Thank you for the feature suggestions. We will forward those for consideration.
0HELPFULS
1285286287...