Forums/
Kasa Smart Switches
2021-01-14 19:08:18
@Jagger If you have the v2 hardware version there was firmware released a couple of weeks ago to try and address random reboots which is version 1.0.5. Try to factory default the switch where the...
0HELPFULS
Forums/
Powerline Adapters
2021-01-14 18:44:35
@GB3131 The link speed in the utility does not equate to the real world speed you will see in the end. What you can try to do is to move the powerline adapter to a different power outlet as...
0HELPFULS
Forums/
Range Extenders
2021-01-14 18:04:04
@Amber.Redeye I would recommend reaching out to our support team at this point. It sounds like the device may be failing.
0HELPFULS
Forums/
Powerline Adapters
2021-01-14 17:41:28
@Theonlyposeidon With the TL-PA8030 there actually is nothing to configure other than pairing them which is used with the pairing button. They do not get an IP from the router as they only relay the...
0HELPFULS
Forums/
Wi-Fi Routers
2021-01-14 17:36:46
@Nutroll Look below the router and make sure the firmware being used is for the correct region. If the router shows (US) below, then the firmware should have the name (US) as well. Another thing to...
0HELPFULS
Forums/
Wi-Fi Routers
2021-01-14 17:18:49
@Shuang The first thing I would check is the network settings of the printer. The printer might have a static IP address assigned to it that matched the previous router. When setting up your printer...
0HELPFULS