Forums/
Kasa Smart Switches
2021-03-01 18:29:55
@Mark_W Each switch should of had a load wire coming from the box to the switch. They should be moved to the Load of the HS220. The black wire coming from the box that was feeding the Line daisychain...
1HELPFULS
Forums/
Kasa Smart Switches
2021-02-26 16:06:46
@Jarmic23 Your Welcome. Let us know how it goes.
0HELPFULS
Forums/
Kasa Smart Switches
2021-02-24 23:30:20
@Jarmic23 Turn off breaker. To keep the outlet on all the time you need to remove the two black wires from the switch and put them together. Add one of the black leads from the HS200 to the two black...
2HELPFULS
Forums/
Kasa Smart Plugs
2021-02-23 01:39:24
@Gilligan If you did not use the same SSID and password on the new router, then you need to reset the plug and install it again using the new SSID and Password.
1HELPFULS
Forums/
Kasa Smart Switches
2021-02-16 21:42:47
@Mark_W Most of the time a re-wire will involve cutting openings in the sheetrock
0HELPFULS
Forums/
Kasa Smart Switches
2021-02-16 21:23:29
@Mark_W The slide in connector with the black and white wires is not a neutral. In your case the power is at the fixture, and the neutral is at the fixture. Without the neutral you can not use a...
1HELPFULS