Forums/
Kasa Smart Switches
2020-05-02 01:17:48
@Azazel A dumb switch never has a Neutral(white) attached. in your case the red and white are travelers.
2HELPFULS
Forums/
Kasa Smart Switches
2020-05-02 00:48:58
@Azazel You need to use the HS210 The white and red are the travelers, black is the common/load. The wire you should use as the white neutral is the two white wires under the orange wirenut.
3HELPFULS
Forums/
Kasa Smart Bulbs
2020-04-30 01:45:35
@Teviot Remote control option was removed awhile ago. Do you have the latest App on the phone? Try deleting the App, then install using the same account info. Then reset and reconnect the LB120
1HELPFULS
Forums/
Kasa Smart Switches
2020-04-27 00:27:18
@Aphelion_Blue The most simple way is to just treat the double black as 1 wire, and connect the HS200 as you normaly would.
2HELPFULS
Forums/
Kasa Smart Plugs
2020-04-18 18:07:05
@mylowes Using the ground as a neutral can hurt/kill someone if they remove the ground at the breaker pannel.
1HELPFULS
Forums/
Kasa Smart Switches
2020-04-06 20:05:06
@Porchbeers Treat the two black wires on the HS200 as the two screws on the switch. So the switch on the left in your picture has the each wire going to the black wires on the switch. The switch on...
1HELPFULS