Forums/
Kasa Smart Switches
2020-12-27 13:46:55
@tward1 Not much that I can see, other then the look of the switches.
1HELPFULS
Forums/
Kasa Smart Switches
2020-12-27 00:25:49
@dmelideo You only need to replace the one 3way switch that has the power source and neutral.
1HELPFULS
Forums/
Kasa Smart Switches
2020-12-27 00:24:07
@tward1 If you have a light that is controlled by 3 switches, then you have a 3way switch at each end, and a 4way switch in the middle. You only need one HS210 to replace the 3way switch that has the...
1HELPFULS
Forums/
Kasa Smart Switches
2020-12-23 16:12:10
@tiger88 connect the Wan interface of the main router to the ONT. Connect the hub to the Lan interface of the main router.
0HELPFULS
Forums/
Kasa Smart Switches
2020-12-22 02:42:12
@Pbaker did the original switch have 2 wires to one screw, and one wire on the other screw?
0HELPFULS
Forums/
Kasa Smart Switches
2020-12-18 22:19:56
@Kenzo40 Try reversing the black and red, on a HS220 that does mater where the powered lead goes.
1HELPFULS