TonyOffline
Following: 0Followers: 54
Forums/ Wi-Fi Routers
2020-10-09 22:24:46
Re:Archer C7 in Access Point Mode Fails to show ANY Wireless Clients
@tpDan225 What you can try to do is to have the client device ping the A7. If devices are configured for a static IP, try switching to DHCP.
0HELPFULS
Forums/ Adapters
2020-10-09 22:02:20
Re:how to upgrade T4U V2 V2 firmware
@Tmween You will need to manually install the drivers. Here is a FAQ that will show you how: https://www.tp-link.com/support/faq/920/
0HELPFULS
Forums/ Wi-Fi Routers
2020-10-09 21:50:43
Re:Archer A7 disconnecting
@thebalconyfool The drops could be the result of the modem, Ethernet cable, WAN port. Should you end up returning the router, and still get drops then the fault is probably in the modem. For now, if...
0HELPFULS
Forums/ Range Extenders
2020-10-09 21:46:55
Re:Verizon FiOS Router + RE220 - one SSID/network name possible?
@whatsaliju The extender can be named the same or different of the router, even before OneMesh both options were available. The thing with the SSIDs being the same is that it would fall on the device...
0HELPFULS
Forums/ Deco
2020-10-09 21:26:12
Re:Can one deco connect to another deco ?
@Roger1425 You can have a Deco wired to another Deco in a daisy chain topology. So for the first Deco, one port will be wired to the modem, the other will be wired to the second Deco. The second...
0HELPFULS
Forums/ Adapters
2020-10-09 21:14:16
Re:driver
@goofy2 Make sure the USB adapter is not plugged into a USB slot labeled "SS". Also, go into the adapter properties, and see if there is an option for "MIMO Power Save Mode". If so, turn that off.
0HELPFULS
1333334335...