Forums/
Deco
2020-10-22 21:24:50
@NigelLim I am not sure what you mean by rebuilding your items? After you factory reset your Deco, and configure it again, you would just have the same network name and password you currently are...
0HELPFULS
Forums/
Deco
2020-10-22 21:21:17
@Mau70 1. To measure the signal strength, download a Wi-Fi analyzer on your phone. Make note of the MAC address of the units to know what network is what as you will see multiple instances of the...
0HELPFULS
Forums/
Kasa Smart Switches
2020-10-22 21:16:47
@Bttrym8 If you were to physically go to the switch do the same thing as you had Alexa do. If it is also not consistent, then incorrect wiring usually does that. Another is if you only have one HS210...
0HELPFULS
Forums/
Deco
2020-10-22 21:13:54
@petiABQ I believe the Deco by default block all ICMP requests, this was mentioned previously for the M5 in a older firmware. Does your M9 respond to pings on your WAN port? If so, what is the...
0HELPFULS
Forums/
Range Extenders
2020-10-22 21:02:14
@BobDar If the extender is broadcasting the default Wi-Fi network that has the name TP_Link etc. do a factory reset on it by holding the reset for 15 seconds while it is plugged in. If the extender...
0HELPFULS
Forums/
Kasa Smart Switches
2020-10-22 21:00:00
@lonestar43 If Google works, then the Kasa app should be fine. I would disable the Alexa skill, and re-enable it. If that does not work, log into your computer, disable the skill there and enable it...
1HELPFULS