Forums/
Kasa Smart Plugs
2020-12-17 18:37:41
@cjb As you are going through the setup, and get hit with the error message of "Something went wrong..." go back to the phone's available Wi-Fi list, and connect back to the smart device, then you...
0HELPFULS
Forums/
Range Extenders
2020-12-17 00:03:16
@SoundMaker I would expect the CPE to be stronger since it is a directional signal compared to the omnidirectional signal from the hub. You mentioned a unique SSID for the CPE so the networks are not...
0HELPFULS
Forums/
Deco
2020-12-16 23:55:22
@Gabebalazs I would check the firmware to make sure it is up to date. should be higher than 1.4.x.
0HELPFULS
Stories/
Home Network Community
2020-12-16 23:45:48
@saeideh If the device is not powering on that sounds like it may be malfunctioned out of the box. @PRS_Chicago The RE450 does not have OneMesh firmware so you can't create the OneMesh network. You...
0HELPFULS
Forums/
Range Extenders
2020-12-16 23:41:56
@Jeff_R If you were to use the Tether app or log into the extender directly, do you the clients listed there?
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-16 23:38:06
@SpacePope I would recommend to continue working with our support as they investigate it further and work with senior engineers if need be to try and resolve your issue.
0HELPFULS