Forums/
Deco
2020-12-17 21:56:47
@AlsoCalledChris The case is seen when the WAN DNS is referencing an IP on the LAN, say a Pi-hole device that is the DNS server. In your case is your WAN including the WAN DNS referencing a different...
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-17 21:43:50
@HANSM I would probably reach out to Lennox to see what else could be missing or needing to be configured.
0HELPFULS
Forums/
Deco
2020-12-17 21:41:09
@BeaverMjr Try going to the furthest Deco device, factory resetting by holding the reset for one second, then add it back into the Deco network. What the Deco should do is see what connections are...
0HELPFULS
Forums/
Deco
2020-12-17 19:27:34
@RSL111 The recommendation is to make sure the existing router Wi-Fi does not cause any interference with the Deco. If your network has been running fine you can leave your network alone.
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-17 19:14:13
@DanTheMan827 Thank you for the feature request.
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-17 18:53:09
@DanTheMan827 You could try setting the IP address on the device itself which the router should be able to communicate with if the information is correct. Alternatively, you could also try setting...
0HELPFULS