Forums/
Kasa Smart Plugs
2021-01-26 16:45:12
@Mani_78 If you go into the settings for the Kasa app, then "Location and Time", if you manually set a location in the US does that help you install them? Since the plug has US firmware it will only...
0HELPFULS
Forums/
Kasa Smart Switches
2021-01-26 16:37:08
@Kathie68 If the HS200 is installed in a single-pole double-throw it will cause the lights to flash. The HS200 is designed for a single-pole single-throw. If you happen to have another outlet that...
0HELPFULS
Forums/
Kasa Smart Plugs
2021-01-26 16:25:09
@Diane6185 You could try modifying your wireless security to see if that works. So if the 2.4G on your router is using WPA2, switch to WPA and vice versa. Set up the plug, then move it back to what...
0HELPFULS
Forums/
Kasa Smart Switches
2021-01-26 16:21:28
@weav If the outlet is a single pole double throw, that will cause the lamp the HS200 to constantly flash. The outlet needs to be a single pole single throw.
0HELPFULS
Forums/
Kasa Smart Plugs
2021-01-26 16:15:41
@apriljns I am assuming you are not seeing the smart plug wireless network that you connect to begin setting up the plug. If so, you may need to factory reset the plug. To do that, make sure the plug...
0HELPFULS
Forums/
Kasa Smart Plugs
2021-01-26 16:10:32
@mseye Unplug the smart plug from the wall then plug it back in. Give the plug a couple of minutes to boot up. See if the light turns solid then look in the Kasa app to see if it is back up. If so,...
0HELPFULS