@nzfred Nevertheless you can still utilize your AX50 avoiding double NAT in your network: For example: 1. If Netcomm NF18ACV can be configured in bridge mode you can use the AX50 as your main...

@nzfred Here are the WAN types that AX50 supports: If you connect Netcomm NF18ACV LAN4 (for example) to AX50 WAN port (Dynamic IP) you should connect to the internet.

@ukmartian You've been advised that to avoid the double NAT in your network. I believe that it will work if you just change the operating mode to AP. If you've set some special features on the device...

@Jessola See the OneMesh compatible devices list here. Archer C7 v5 supports OneMesh. As for the link you're refering I believe it's not correct - see the C7 v4 FW releases - there's nothing...

@ukmartian It strongly depends on your device model - see this guide on how to do that.

@Abu.Sayeed- Use this FAQ to determine your device HW version and region - on the bottom sticker you should find this information. After that you can go ahead and select the approapriate FW version...