@Ebbez Check here.

@Onavi 1. You can configure DMZ on C6 to isolate the port-forwarding problem: In this example 192.168.1.100 the IP address of your Soulseek PC, make a test if it works correctly. 2. You can disable...

@A-O No, these watermarks can be seen usually when beta FW releases have been installed.

@Onavi Here you can check your Internet port IP address: If it is not in the following ranges then it's public: Have you checked your network location type ? It should be "Private network" to be sure...

@meryfd Sometimes resetting the device to its factory settings helps. Make notes of your C6 configuration and hard reset the device. Then re-configure from scratch to see if that would make a...

@PBB14 By default these ports are blocked from external access: If you have configured any virtual servers for these ports in NAT forwarding just delete them: If you still believe that these ports...