@AnglicanARK Check this resource for more details.

@Omae1 You have to re-arrange the WR841N LAN settings to be able to put both devices in the same subnet with private IP addresses. For WR841N LAN settings use (for example) 192.168.1.1 / netmask...

@FXV300 No. You've misinterpreted what I was trying to explain. You're limited to 100mbps when the ethernet port is used - AP mode. As for the N300 it could be achieved when using the device in range...

@FXV300 Leave it to Auto then, let the device determine the appropriate channel width. By the way the ethernet port of the device is 10/100mbps capable - specs. That means even if you have it...

@Sanandan Try setting C50 WAN port as Dynamic IP and test. If that doesn't work, you may call your ISP and ask them for help.

@ukmartian If your smart plugs devices have been paired to the C50 wireless router, then you have to set the SSID, password and wireless security settings the same in the C50 AP mode: There shouldn't...