Forums/
Wi-Fi Routers
2021-03-24 23:17:25
@Coach-D Unfortunately, the USB printing feature was removed with the newer firmware releases. You can downgrade the firmware of the Archer A7 to the build where it did have the function by...
0HELPFULS
Forums/
Deco
2021-03-24 23:07:47
@Al_Borges Here is the firmware you can upload to get the UPNP option like you mentioned is there for the other units: Deco X20/X60/W3600 V1:...
1HELPFULS
Forums/
Wi-Fi Routers
2021-03-24 23:04:54
@vskus In router 2 configure a port forwarding rule for IP 192.168.2.101 for whichever port that IP uses depending on the service: https://www.tp-link.com/us/support/faq/1541/ So say for example I...
1HELPFULS
Forums/
Wi-Fi Routers
2021-03-24 22:51:58
@Mister_K When experiencing the Wi-Fi slowdown, were the various eight devices disconnected to see if the speed returns? Or the router rebooted, and tested with one device? You can potentially try...
0HELPFULS
Forums/
Deco
2021-03-24 22:25:44
@CappuccinoKid If the Deco served as your main router, then anything wired to any of the satellite nodes would be seen on the network or on the app with the exception of devices that have a...
0HELPFULS
Forums/
Wi-Fi Routers
2021-03-24 22:07:01
Rikus3 wrote Will the AX50 get the WPA3/OneMesh update YES or NO No
0HELPFULS