Forums/
Powerline Adapters
2021-06-13 12:04:04
@BobTPPLC See post #101. tpPLC Utility: basically reset both adapters to their defaults (network name, passwords etc.). This is critical as both adapters (8010 and 8630) must be on the same default...
0HELPFULS
Forums/
Powerline Adapters
2021-04-03 07:00:16
@crusjeff Try this method: Try updating the adapters with the tpPLC utility instead of an old powerline utility. reset the WPA8630 to factory defaults (and all other 'client' or STA devices) reset...
0HELPFULS
Forums/
Powerline Adapters
2021-02-21 11:14:21
@PowerlineFW @netadair Not sure if you already tried it but reset all adapters, let them join the same unsecure network ("HomePlugAV"; default network management key) and then create a secure network...
0HELPFULS
Forums/
Powerline Adapters
2021-02-20 14:13:01
STA 000 18:A6:F7:A2:03:F6 18:A6:F7:A2:03:F4
STA 004 18:A6:F7:A2:03:F6 18:A6:F7:A2:03:F4 Under the assumption that STA 000 and STA 004 are 2 different adapters, they have (''share'') the same MAC...
0HELPFULS
Forums/
Powerline Adapters
2021-02-15 10:24:16
@PowerlineFW @netadair 2.0.0 is the stock firmware? If I remember correctly the TL-WPA8630p V2 (EU) adapter had to be updated incrementally. Try to update to 2.4 > 2.5/2.6 > 2.8/2.10. At some point...
0HELPFULS
Forums/
Powerline Adapters
2021-01-31 18:22:40
Thank you all, I was able to upgrade both devices of the TL-WPA8630P-EU-V2-kit to powerline (PLC) version 2.8.0.0030. The rest (WIFI) is still on 2.0.3 Build 20171018 Rel.36564. TL-PA-8010P-EU-V2:...
1HELPFULS