Forums/
Wi-Fi Routers
2020-02-04 00:13:46
@Kobe0921 Smart Connect when enabled should manage the 3 SSID's. Since the printers are only 2.4Ghz they should still see the SSID (all 3 SSID's are set the same and the same password under Smart...
0HELPFULS
Forums/
Wi-Fi Routers
2020-02-03 21:34:08
@Kobe0921 If using the same SSID for both bands, how would you know which you even connected too? Not using Smart Connect that manages all 3 bands, you might always connect to the stongest one the...
2HELPFULS
Forums/
Wi-Fi Routers
2020-01-24 14:46:57
@Monk, As Tony says, W10 presents a different problem. SMB1 needs to be used as the router uses NETBIOS for sharing. Under Programs and Features you need to ADD WINDOWS FEATURES and select SMB 1...
0HELPFULS
Forums/
Wi-Fi Routers
2020-01-16 15:24:50
@craig34 Yes, that opens the 'guest' to full access. I am not sure if it is a 2-way street though? Of course you could protect yourself using p/w's on devices. Does sort of pose other problems...
1HELPFULS
Forums/
Wi-Fi Routers
2020-01-15 18:43:35
@craig34 Over a few routers, I've 'given up' on using Smart Connect, especially on a tri-band router. Smart Connect has many options, and it seems it could be implemented differently on routers, even...
0HELPFULS
Forums/
Wi-Fi Routers
2020-01-13 13:55:23
@JoshuaJam I am sure it is, but I found it was working 'reasonably' well when I switched over to the 2.4Ghz connection on the phone. 5Ghz didn't work 1/2 as well. It isn't the router in my case. I...
0HELPFULS