Forums/
Range Extenders
2021-03-01 23:13:36
@jeff.freedman The extender will copy the settings of the router so if you need 20 MHz for your 2.4G, set that in your router. If you have a TP-Link router the option to change the width may not be...
0HELPFULS
Forums/
Wi-Fi Routers
2021-03-01 23:08:32
@ZizoMass I don't see anything eluding to tapping into another router that has the USB-connected printer. Does the printer have an Ethernet cable that you can connect to the router instead?
0HELPFULS
Forums/
Deco
2021-03-01 23:04:12
@RobAuerNJ If the Deco unit reset is held for an extended period of time it will place it in recovery mode. You could try to leave it powered on for several minutes, and then when doing the reset,...
0HELPFULS
Forums/
Wi-Fi Routers
2021-03-01 23:02:26
@Volvstang If nothing changed on the router end, then something changed on the opposite end. Go to Advanced > NAT Forwarding > ALG, and make sure PPTP passthrough is enabled. If that still does not...
0HELPFULS
Forums/
Wi-Fi Routers
2021-03-01 22:59:33
@momzfavorite If you installed Tether for the app, uninstall it on your smartphone and unbind the router to the cloud account. Reboot the router and test the speeds again. Make sure no device is set...
0HELPFULS
Forums/
Range Extenders
2021-03-01 22:55:55
@AmyB Make sure your router has a different wireless name from each band so everything is unique or else your dryer might keep trying to connect to your router even though your extender is close. For...
0HELPFULS