Forums/
Powerline Adapters
2020-09-17 22:56:52
@lewinr The speed you see in the utility is not the real speed, that shows the link rate between two adapters. You would generally get 30 to 40%, but if you add interference from other electrical...
0HELPFULS
Forums/
Wi-Fi Routers
2020-09-17 18:31:29
@nssk979 Remove any saved profile/network for those devices so when they connect it would be as if they are connecting to the network for the first time.
0HELPFULS
Forums/
Wi-Fi Routers
2020-09-17 18:13:12
@JJC Found this on another forum you could try which is to statically assign an IP to the receiver. A dish user mentioned their receiver was grabbing an IP already taken: You can manually configure...
0HELPFULS
Forums/
Powerline Adapters
2020-09-17 18:04:32
@Keith8 The powerline doesn't have a specific requirement for the Ethernet connection so if your USB adapter is able to get network connectivity directly to a switch or router, it should work being...
0HELPFULS
Forums/
Range Extenders
2020-09-17 17:53:57
@GBRNC I think the one Wi-Fi name refers to our OneMesh feature: https://www.tp-link.com/us/onemesh/ You would use our router and an extender that gives an OneMesh network which gives one Wi-Fi name....
0HELPFULS
Forums/
Range Extenders
2020-09-17 17:40:40
@Temoshee I think the N300 may have been switching networks so the connection would drop while it switched. Having unique names prevents a device connecting to another network when they should not be.
0HELPFULS