Forums/
Powerline Adapters
2020-09-18 21:58:59
@Glune You could try running the tpPLC utility, from there you should be able to see the firmware by click on the basic tab then going to version:
0HELPFULS
Forums/
Wi-Fi Routers
2020-09-18 21:43:00
@radim Thank you for the feature request. We have received similar feedback which we will forward to our developers in this instance for consideration.
0HELPFULS
Forums/
Deco
2020-09-18 21:22:51
@Vito44 There currently is not firmware available where you can switch to AES. What you can do is switch your wireless security to WPA3 (Deco APP-> More -> WiFi -> click on password). For devices not...
0HELPFULS
Forums/
Deco
2020-09-18 21:03:18
@kgovert007 When you log in you should be able to see the firmware version by going to Advanced > System > Firmware Update: As far as all our Deco units, in order to configure them, that can only be...
0HELPFULS
Forums/
Range Extenders
2020-09-18 20:53:13
@Lumbuji Is the router set up for both WPA2-PSK (TKIP) + (AES) or Auto or only WPA2-PSK-AES like below?: If that is what the router is running, set up the extender but through the web browser rather...
0HELPFULS
Forums/
Range Extenders
2020-09-18 18:14:28
@flyingace What I am saying is everything is possible, and to be aware so you know what would need to be done in case of any issues. If everything is named the same and works fine on a non-mesh...
0HELPFULS