Forums/
Kasa Smart Plugs
2020-10-05 20:07:35
@RendCycle They should be able to work on LAN only similar to the Tapo cameras. Now, given your network, you have three different routers. If all those routers each have their own network segment...
0HELPFULS
Forums/
Wi-Fi Routers
2020-10-05 17:26:34
@Cookre You could also do a factory reset on the router and see if both default wireless networks show up.
0HELPFULS
Forums/
Kasa Smart Bulbs
2020-10-05 16:29:39
@Alegro Was your iPhone running the Kasa app version 2.26? Also, was the iPhone running any VPN software?
0HELPFULS
Forums/
Deco
2020-10-05 16:00:16
@Gradypf When you mentioned you can connect to the nighthawk fine, did you remove the Deco, and connect the Ethernet cable to a computer with the Wi-Fi disconnected? If so, swap the Deco node with...
0HELPFULS
Forums/
Deco
2020-10-05 15:56:00
@JDW2 In doing the test you may be on the 2.4G, disable the 2.4G so you are on the 5G network, and perform the test again. Make sure to try other wireless devices as well. Also, measure the speed...
0HELPFULS
Forums/
Wi-Fi Routers
2020-10-05 15:50:58
@bravodeltacisco Connect your smartphone to the router, now ping from both computers to the smartphone. Does that work? Also, check the IP information of your connected devices and make sure all are...
0HELPFULS