Forums/
Wi-Fi Routers
2020-10-23 22:31:10
@CW_knights4 Take the Ethernet cable from the Archer A6 WAN port and connect that to a computer to test to make sure the Deco is providing an internet connection. If that checks out, connect the...
0HELPFULS
Forums/
Wi-Fi Routers
2020-10-23 22:24:47
@Hairoun Thank you for the info. With respect to the firmware, the US region routers have the 200721 build. If you visit our official website and look at available firmware is there a newer firmware?...
0HELPFULS
Forums/
Deco
2020-10-23 22:16:56
@JonKong If disconnections keep happening on a single band you can try swapping the main Deco with another to see if that is the culprit. If disconnects continue, I would recommend following up with...
0HELPFULS
Forums/
Wi-Fi Routers
2020-10-23 22:01:54
@DanTheMan827 What the Deco tries to do is recommend a node to connect to where the device will make the decision. For those that do not connect to the closest, the next thing to check would be to...
0HELPFULS
Forums/
Range Extenders
2020-10-23 21:57:14
@JayF-SCL Leave the extenders powered on and reboot the router to see if it may be a potential IP conflict. When the issue happens, check the LED light to see if those indicate it is still connected...
0HELPFULS
Forums/
Powerline Adapters
2020-10-23 21:42:07
@robardin The link rate does not mean what your speeds should be, similar to the link rate on a wireless device. A general rule of thumb is you will look getting 40% of the real-world speed. There is...
0HELPFULS