Forums/
Wi-Fi Routers
2020-11-09 16:47:32
@Mattlaplant If the LED lights on the modem change when the issue happens it may be the modem that is possibly the issue? Have you tried bypassing the TP-Link router and leaving a computer connected...
0HELPFULS
Forums/
Powerline Adapters
2020-11-09 16:15:30
@Juls99 I would recommend reaching out to your local support team, as the 7510 in the Italian region indicates it is (EU) while the firmware in the UK page is (UK). Our firmware is specific to region...
0HELPFULS
Forums/
Deco
2020-11-09 16:10:12
@JFSM For the third Deco, you can try and run an Ethernet cable from it to the second Deco or to the first Deco. Another alternative you can potentially look at is using powerline adapters like the...
0HELPFULS
Forums/
Wi-Fi Routers
2020-11-09 16:06:08
@Joost1967 I would factory reset it by holding the rest for 15 seconds, and run it like a typical router to see if that even works. Also, the WAN port may be bad, if so, configure the LAN IP of the...
0HELPFULS
Forums/
Wi-Fi Routers
2020-11-09 16:02:50
@vtjoshie Since you have a cable modem, log into the Arris device, and look at the system logs. If you see critical 3 or 4 errors, that might explain the internet drops. The errors indicate your...
0HELPFULS
Forums/
Feature Request
2020-11-09 16:00:25
@Armarm There are currently no mentions of making OneMesh functions with an Ethernet cable. Currently, our Deco mesh system is able to function via Ethernet backhaul.
0HELPFULS