Forums/
Range Extenders
2020-12-09 19:37:20
@MemoirsOzeus Devices connected through the extender will have a different MAC address compared to their original one. The first half of the MAC should at least be the same as the device's actual...
0HELPFULS
Forums/
Kasa Smart Plugs
2020-12-09 19:31:21
@Steel_Rat Go into the settings of the Kasa app and resync the time, then look at the device settings to see if that is corrected. Alternatively, you can modify the time zone to compensate for the...
0HELPFULS
Forums/
Kasa Smart Plugs
2020-12-09 19:29:53
@Fuzzy_Bear The devices are bound to whichever email account they were originally set up with. When open Kasa on your new phone, make sure to log into the same email account used to set up the...
0HELPFULS
Forums/
Deco
2020-12-09 18:20:41
@hanmari Power down then power up every node, and try the update again in the Deco app. If that fails, go to the support page of the Deco and download the oldest firmware version which should be...
0HELPFULS
Forums/
Deco
2020-12-09 17:42:21
@Bernie100 Look at the LED indicators to make sure the 2.4G and 5G are green. If not, factory reset the extender and set it up again to the router. Other things to try is to reset the extender, then...
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-09 17:39:56
@quacksi Check the power supply to make sure it matches the power requirements of the router. If that is good, try plugging the TP-Link device into another outlet. If it continues to reboot, reach...
1HELPFULS