Forums/
Deco
2020-12-16 17:58:18
@Dan_F One way that will probably solve that is to set the Deco in Access Point mode: https://www.tp-link.com/us/support/faq/1842/ It will lost the router features but will be on the same network as...
0HELPFULS
Forums/
Range Extenders
2020-12-16 17:52:39
@SoundMaker If you are getting similar results from two different networking devices it may be the environment? What you can try is to mount a CPE210 on the garage, and then attach an access point so...
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-16 17:34:10
@markimark8 If you have a cable modem I would log into the modem and verify the system logs to see if there are any critical 3 or 4 errors that cause the internet to randomly drop. As far as the...
0HELPFULS
Forums/
Kasa Smart Bulbs
2020-12-15 23:46:43
@ReD-BaRoN There currently is not a mode for that.
0HELPFULS
Forums/
Deco
2020-12-15 23:34:28
@AlsoCalledChris If the Deco detects any LAN overlap then it will change the IP. So if the WAN DNS server references an IP on the LAN, the Deco will change the LAN. So addresses on the WAN must be...
0HELPFULS
Forums/
Wi-Fi Routers
2020-12-15 23:31:44
@tmanstls If you were to get your computer and connect to the router via Ethernet, does the link speed say gigabit-speed or 100 Mbps?
0HELPFULS