TonyOffline
Following: 0Followers: 54
Forums/ Deco
2021-01-27 17:47:13
Re:deco M5 connection to Fios
@rcspencer1 You should be able to disable the WiFi on your Actiontec doing the following: Log into admin GUI on Web by entering 192.168.1.1 or myfiosgateway.com in the browser address bar Enter your...
1HELPFULS
Forums/ Kasa Smart Plugs
2021-01-27 17:29:44
Re:HS210 amber light
@loolaide If you are setting up two HS210s on one three-way circuit, only one needs to be connected to the WiFi, the other does not. If you press and hold the main button, after five seconds the WiFi...
0HELPFULS
Forums/ Range Extenders
2021-01-27 00:11:39
Re:Searching for solution to extend home network outdoors
@Budman For the network name, you can have both options. I would make them different so I know which network I am connecting to, but you can make them the same so there is one network you only need...
0HELPFULS
Forums/ Wi-Fi Routers
2021-01-27 00:07:40
Re:Archer 7 set up correctly, but after disconnecting it, moving it, I can no longer log in
@captainkirk When doing either configuration, yes, you would disable DHCP. With respect to the IP, you would set that outside of your current DHCP pool. So say your router gives out IP addresses of...
0HELPFULS
Stories/ Kasa
2021-01-26 23:52:48
Re:Using Alexa "Routines" feature with your TP-Link Smart devices
@gmroob Thank you for the solution update!
0HELPFULS
Forums/ Wi-Fi Routers
2021-01-26 23:48:30
Re:Archer A6, after setting to Access Point mode can't reach management port
@Dave_067 If the device you want to connect the A6 to does give an IP use a computer to verify that. For example, wire your computer to the phone device, then look at the LAN settings. Here is an FAQ...
0HELPFULS
1148149150...