Forums/
Deco
2021-02-10 18:00:59
@Jeeptec If i disable the router portion in the Nighthawk and select modem only, does this disable the ports too? Yes, what will happen is the modem will give an internet connection to only one wired...
0HELPFULS
Forums/
Wi-Fi Routers
2021-02-10 17:55:50
@TheBigBadWolf Log into the A7 and go to Advanced > System Parameters > Duplex, see if that was set to 10/100. If it is set to Auto, change it to 1000 Mbps full-duplex. Save the settings, then reboot...
0HELPFULS
Forums/
Deco
2021-02-10 17:43:18
@Jim45 Your TiVo may be statically assigned an IP for the previous router. I would go into the network settings and make sure it is set for DHCP.
0HELPFULS
Forums/
Deco
2021-02-10 17:39:59
@KATZGATZ Test the wired speed on the main Deco. Go into the QoS settings to see if there is an upload and download speed setting. If there is set it to 1000 upload and 1000 download. Swap the...
0HELPFULS
Forums/
Range Extenders
2021-02-10 17:36:11
@Lvrn When doing WPS the extender will copy both network names onto itself along with the wireless password to secure it. If you look at the extender all three LED lights should be blue indicating it...
0HELPFULS
Knowledge Base/
Troubeshooting
2021-02-09 23:47:21
Note: This FAQ is only for the dual-band wireless adapter and wireless router. Case 1: Not able to see any 5G Wi-Fi. The old wireless adapter that doesn't support 5G installed on your computer may...
0HELPFULS