ArcherC8LV5Offline
Following: 0Followers: 8
Forums/ Wi-Fi Routers
2020-02-19 21:04:29
Re:TP-Link WR940N dashboard access
The default IP address for that router is 192.168.0.1.
0HELPFULS
Forums/ Wi-Fi Routers
2020-02-19 20:56:00
Re:2,4G horrible, 5G working normal
2.4G is used by many other devices which can cause issues. Also try changing both the band width and channel. Sometimes another WIFI device can cause issues such as but limited to an old device that...
0HELPFULS
Forums/ Wi-Fi Routers
2020-02-19 20:50:49
Re:Setup problem
The orange light says "The router’s Internet port is connected, but the internet service is not available." Try using a different Ethernet cable as there may be issue there even though it works for...
0HELPFULS
Forums/ Wi-Fi Routers
2020-02-19 13:14:45
Re:Slow LAN speeds on PC
I have a different router so my interface may be different. Sign on to the router and in advance setting is NAT Boost. One other thing to try is to change the Ethernet cable between the router and...
0HELPFULS
Forums/ Wi-Fi Routers
2020-02-18 12:38:57
Re:TP-Link WR940N dashboard access
Several ways but the best is to connect a PC direct to the router using a good Ethernet cable, sign on to your browser and enter the IP address or link printed on a label on your router. The default...
0HELPFULS
Forums/ Wi-Fi Routers
2020-02-18 12:30:58
Re:Archer a6 server port forwarding
I used Forwarding virtual servers for may DVR setting the protocal to the expected one which was TCP in my case. I have UPnP turned on for my device and I use address reservation so the MAC is...
0HELPFULS
1177178179...