ArcherC8LV5Offline
Following: 0Followers: 8
Forums/ Wi-Fi Routers
2020-05-13 20:35:09
Re:Optimizing bandwidth for AC1750
In my house with an Archer C8 V1 using Comcast (Xfinity) Blast 200 service, I can get over 200 on WIFI 5GHz in line of sight 10 feet or so, On the 2.4 I never get that high. Just ran a test with my...
0HELPFULS
Forums/ Wi-Fi Routers
2020-05-13 19:21:27
Re:Archer A7 - intermittent high ping / buffering
Bypass the router and connect a PC direct to the modem and run a bunch of speed tests. If it is not what you should have from the ISP, contact them and get that resolved first. Then connect the...
0HELPFULS
Forums/ Wi-Fi Routers
2020-05-13 19:11:58
Re:Optimizing bandwidth for AC1750
The 2.4GHz will give you more distance. The 5GHz will give you more speed. Depending on your area, selecting a different channel may be better and depending on your devices a different channel width...
0HELPFULS
Forums/ Wi-Fi Routers
2020-05-12 11:28:44
Re:Trouble getting devices connected to two different routers to talk to each other
I do not think that would work with both routers set up in router mode unless you were to treat it like you were going to link from outside of your network such as remote desktop.
0HELPFULS
Forums/ Wi-Fi Routers
2020-05-11 21:01:49
Re:Can I use two routers on same network?
You can set up an additional router as an extender or access point. It does complicate the setup and does not always work for everyone. I would recommend a MESH system as that would give you the best...
0HELPFULS
Forums/ Wi-Fi Routers
2020-05-11 20:58:00
Re:What is the easiest, fastest way to xfer settings from WRT54G to Archer AC4000 - help!
If you need a simple connector to connect two Ethernet cables and if not a real long run google "female - female Ethernet connector" as you should not need a powered switch. Looking at the ratings on...
1HELPFULS
1150151152...