Forums/
Deco
2019-09-23 21:42:32
@johsam You would frist need to check your connection link rate on each computer. Make sure its 1000 Mbps or 1 Gbps. After that make sure your NICs are set to Full Duplex. Then test the connection...
0HELPFULS
Forums/
Wi-Fi Routers
2019-09-23 21:22:18
@Hydrocyclone Wireless bridging for the Archer C7 is the WDS option. I assume when you said you put the router in bridge mode you meant this. WDS is notoriously unreliable and is never really...
1HELPFULS
Forums/
Wi-Fi Routers
2019-09-23 21:11:47
@richdavenport Hi Rich. With the Archer C9 V3 the parental controls can have a blank blacklist and an blank whitelist. Allow all sites or block all sites respectively, however they do need a device...
0HELPFULS
Forums/
Kasa Camera - Kasa Home Security
2019-09-23 20:46:45
@Decorah The first step would be to rule out location and enviroment. To do this set the camera up close to the router and in an area with clear line of sight and no barriers between the router and...
0HELPFULS
Forums/
Wi-Fi Routers
2019-09-23 20:34:14
@Kulkun It could be a power setting issue. To test go to Advanced - Wireless 2.4Ghz and reduce the power setting to 75 or 50%. Save the new setting and repeat for 5GHz. then do a reboot. If that does...
0HELPFULS
Forums/
Kasa Smart Plugs
2019-09-23 16:56:01
@RockawayBill If that is the case then the remote control function is working as designed. Likely what would need to happen is you will need to remove the Kasa smart skill from Alexa and then re-link...
1HELPFULS