One mesh
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Tengo un router C80ac1900 archer y 2 extensores re505x One mesh no funciona bien a menudo demora en cambiar de repetidor y se corta
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Are both RE505X connected to the C80, or does one RE505X connect to the other in a daisy chain? What if you only connect one RE505X to the network, will you switch between the C80 and repeater properly?
How long does it take to connect to the other wireless network when a phone or laptop roams from the RE505X network to the C80's, or vice versa?
What is the wireless security type on the C80? Try to fix it on WPA2-PSK, AES, then configure the same on the RE505X, reboot them to confirm.
- Copy Link
- Report Inappropriate Content
Are both RE505X connected to the C80, or does one RE505X connect to the other in a daisy chain? What if you only connect one RE505X to the network, will you switch between the C80 and repeater properly?
How long does it take to connect to the other wireless network when a phone or laptop roams from the RE505X network to the C80's, or vice versa?
What is the wireless security type on the C80? Try to fix it on WPA2-PSK, AES, then configure the same on the RE505X, reboot them to confirm.
- Copy Link
- Report Inappropriate Content
Reinicie los extensores a valores de fabrica y configure de nuevo
Ahora cambian bien entre los tres
En algunas ocasiones cambia bien y en otras es muy lento.Podria mejorar con el router AX20
Si camino normal a veces se corta antes de cambiar y si me detengo demora .
- Copy Link
- Report Inappropriate Content
Tiene WPA/WPA2 Personal
Cambie WPA3 y de nuevo cambia solo entre los extensores ,cuando voy al router cambia, pero luego con los extensores no.Volvi a la seguridad anterior, sigue mal.
En los extensores no pude cambiar la seguridad
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Ahora funciona bien entre extensores pero cuando la toma el router la senal camino hacia un extensor y demora mucho en cambiar
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
What are the devices you are testing the Onemesh roaming between the router and the extender? Are all of them behaving the same?
To locate this issue and try to fix it, we would like to follow up on your case via email. Please check your inbox and provide the information that we need.
- Copy Link
- Report Inappropriate Content
Demora en cambiar , a veces cambia
y luego se corta para volverse a conectar posteriormente
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 19
Replies: 0
Voters 0
No one has voted for it yet.