Home Network Community > Access Points > 192.168.0.254 no response, unreachable.
< Access Points

192.168.0.254 no response, unreachable.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

192.168.0.254 no response, unreachable.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
192.168.0.254 no response, unreachable.
192.168.0.254 no response, unreachable.
2020-05-08 12:45:37 - last edited 2020-05-11 17:33:32
Model: TL-WR700N  
Hardware Version:
Firmware Version:

TL-WR700N travel router was hardware reset. Plugged in ethernet cable from Windows7 machine set to automatic.

Pointed browser to 192.168.0.254.... 'Unreachable'.

Ping from command line.... 'No response'.

Set Windows7 to 192.168.0.100. Still no ping.

The Wifi signal is still there but it is not possible to access and set up the device. Prior to the hardware reset it was fully accessable. This is the first time the device was hardware reset. Am I missing something or is it toast?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:192.168.0.254 no response, unreachable.-Solution
2020-05-08 21:45:12 - last edited 2020-05-11 17:33:32

@LesCarlson 

 

Power on the TP-Link device, wait a couple of minutes, then press and hold the reset pinhole for 15 seconds. Now use a computer to connect to the device via Wi-Fi. Rather than using your Windows 7, you could use the web browser of your phone. What would help is to look at the IP address the phone gets to see if it is a 192.168.0.x. The default IP of the 700N is: 192.168.0.254

Recommended Solution
  0  
  0  
#2
Options
5 Reply
Re:192.168.0.254 no response, unreachable.-Solution
2020-05-08 21:45:12 - last edited 2020-05-11 17:33:32

@LesCarlson 

 

Power on the TP-Link device, wait a couple of minutes, then press and hold the reset pinhole for 15 seconds. Now use a computer to connect to the device via Wi-Fi. Rather than using your Windows 7, you could use the web browser of your phone. What would help is to look at the IP address the phone gets to see if it is a 192.168.0.x. The default IP of the 700N is: 192.168.0.254

Recommended Solution
  0  
  0  
#2
Options
Re:192.168.0.254 no response, unreachable.
2020-05-09 01:29:19

@LesCarlson 

 

Thanks Tony! That was it. To manage device WiFi good. Ethernet not good.

Thanks again for taking the time,

Les

  0  
  0  
#3
Options
Re:192.168.0.254 no response, unreachable.
2020-05-11 17:34:14

@LesCarlson 

 

Glad to see the device is working now, you are welcome.

  0  
  0  
#4
Options
Re:192.168.0.254 no response, unreachable.
2021-07-18 01:00:03

@Toni am not sure if mine is working or not

 

  0  
  0  
#5
Options
Re:192.168.0.254 no response, unreachable.
2021-07-18 01:00:55
all of the lights are on except the one on top
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 28

Replies: 0

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.