@PKP What's the make and model of Router 2 and what is its purpose ? To which router your client devices are connected ? Is it feasible to set the router 2 in AP mode so you'll avoid the double NAT...

@Bacardee Theoretically (since the wireless is a half-duplex technology) it could reach 433 mbps (in reality always less), but in favor of your wireless stability I would recommend the C6 in AP mode.

@Bacardee You have several options to do that: 1. Run an ethernet cable from the AX10 to the PS5 - best speed. 2. Use an intermediate router (like Archer C6) in AP mode - case 1, connected to the...

@xtrail Have you tried these security settings: If the above settings don't work for you, then look at the following list - it may lead you to the root cause....

@Lego No, this number has been hardcoded into the device's FW. For the number of devices above 32 you should use a static LAN IP address.

@PiyushB Follow your user guide for setting up the range extender. Reset: with RE powered on, use a pin to push the reset hole until all the Led flash once.