@1207 I have a working gateway with latest firmware 1.0.1 and OC300 with 4.2.11 and 12 of EAP245 with 5.0.1, and I have two wireless SSID each with a different subnet (and a management subnet that I...

Unless you have multiple subnets and you do want to access these cameras from a different subnet / vlan, why will you not try my method that will still allow cameras to talk to your NVR in the same...

I hope you have looked under Settings / Wired Networks / LAN. Try creating a new LAN, with purpose of "interface" and select the corresponding LAN port, and specify the vlan ID of 1 (since you have...

@clemsongt I believe if you will assign static private IP addresses to these cameras, simply dont assign the gateway and DNS. Just have IP address and subnet mask and without gateway address set up...

@xperiments Hopefully both ends have static public IPs (sometimes called sticky Public IPs in DSL) or at least one end has static Public IP and other end then is initiator of tunnel.

@Matze78 Good suggestion. Security landscape has changed in last ten years that an AV engine alone will not be of help. Anti-malware and even ransomware protection will also be needed. @Fae , Tplink...