bp1000LV1Offline
Following: 0Followers: 0
Forums/ WiFi
2020-05-27 09:46:27
Re:EAP225-Outdoor - Mounting upside down
Thank you, good point about water ingress on the port. I shall stick with the correct orientation.
0HELPFULS
Forums/ WiFi
2020-05-26 14:24:35
Re:EAP245v3 Slow speed with ac 80MhZ width 5560MHz freq
@fsv Even though there are no other access points nearby, that doesn't mean other devices on your network aren't affecting your speed testing. When i tested my network with iperf3 any other wirelss...
0HELPFULS
Forums/ WiFi
2020-05-26 13:55:27
EAP225-Outdoor - Mounting upside down
As the title says, is it ok to mount this upside down? The way this will be wired, with cat6, the connector is underneath the unit and the wire will come from above. The question is regards to the...
0HELPFULS
Forums/ WiFi
2020-02-05 21:44:29
Re:Widely fluctuating Tx Rates
@R1D2 Thanks, very informative. I agree about trying to find the middle ground. It is probably best that i try to set something up with the least amount of user input or config. Users are always the...
0HELPFULS
Forums/ WiFi
2020-02-05 19:34:23
Re:Widely fluctuating Tx Rates
@R1D2 Thank you. I have fast roaming enabled, but not many devices on the network use this feature. I tried to control it with power levels with mixed success and the RSSI threshold disconnect isn't...
0HELPFULS
Forums/ WiFi
2020-02-05 12:24:32
Re:Widely fluctuating Tx Rates
Thank you for your input It was indeed power / channel related. I'm using 80mhz channels and i found that one of the AP's was introducing interferance. What i have is 3 floors in a building, AP on...
0HELPFULS