DanhTran2409 wrote I configured VLAN and PVID for switch TPLink TL1600G-18TS with detail as: Port 1: tag vlan 10 and 20 ( connect to port trunk on switch cisco 3560) Port 3 - 8: tag vlan 10 and PVID...

It could not be TTL defence, as you have L2 repeater. We do not have 902ac in our country, but try different modes of repeater (unversal repeater/wds repeater/etc..). It probably happens, because of...

I met 2 switches with dead USB-port, but not the whole dead switch. If you do not have BootUtil loaded via RJ-45 console port, then go for a refund, if you can. Otherwise, service center will need...

It seems to be a bug. Try to write to technical support, but this model is EOL already...

Carles wrote I am quite new to VLAN setup and I'm not sure if what I am trying to do is not possible or if I am doing something wrong. I have a T1600G-28TS configured as this: VLAN100 (STUDENTS):...

Hi, If your dhcp-server is in vlan 1, and clients are in vlan 10 then you need to configure DHCP VLAN Relay. If dhcp-server and clients are in the different sub-network, then you need to configure...