MityaLV4Offline
Following: 0Followers: 3
Forums/ Business Routers (Standalone)
2018-09-17 11:03:55
Re:TL-ER6120 V1 Problem, it freezes... Someone with the same problem?
Hi guys, Your firmware is too old and buggy. I fixed some hanging problems with TL-ER6120 v1 with following firmware. Check and write here about results
0HELPFULS
Forums/ Business Routers (Standalone)
2018-09-17 10:58:01
Re:Router Settings Changed
First of all, nothing can be changed automatically. I can believe something resets, but not changed. If it was reseted, then 5G will also reset. It is faster to call tp-link technical support. What...
0HELPFULS
Forums/ Business Routers (Standalone)
2018-09-17 10:52:18
Re:ER6120 Port Forwarding not working.
What is your WAN IP? Public or private? It should be public. Also, please remember, that port will be "opened" only when router receives request from LAN-port. If nothing from PC works on this port,...
0HELPFULS
Forums/ Business Routers (Standalone)
2018-09-17 10:46:40
Re:Re:vpn multisite or multicliente withe route between us
Andone wrote If you mean that you need three sites to communicate with each other, you can set up two entries of LAN to LAN VPN on each router, then each router will establish VPN tunnel with other...
0HELPFULS
Forums/ Business Routers (Standalone)
2018-09-17 10:43:08
Re:Vlan on ER5120
As I understand, you have 3 WANs and 1 LAN with configured four 802.1q VLANs tags, connected to AP with 4 SSIDs. You can't configure Load Balance based on VLAN/SSID. If your SSIDs have different...
0HELPFULS
Forums/ Business Routers (Standalone)
2018-09-17 10:23:37
Re:470T+ configuration
vkhandelwal wrote I have two Boradband connection they come with their own modem and it is not possible to connect the cable to wan port directly. DSL1 router IP ( Broad band with Dynamic IP...
1HELPFULS
1474849...