jeb wrote Thanks for that info. If I go that way and get use the 5ghz signal, will devices using that connection through the router in the out building be able to use 2.4ghz also? No, most devices...

jeb wrote I got it all working by choosing the AP Client Router on the 7210, but it's very unstable as far as signal strength. One day it was 32mbs, the first day, and 3 days later the best I see is...

Check on your PC if you get an IP from your router, i.e. if DHCP is working (see network settings). Next try to ping the router. Then try to ping some site on the Internet. If it still does not work,...

Did you set Hyperterminal's parameters correctly? Settings should be:  Bits per second: 38400bps  Data bits: 8  Parity: None  Stop bits: 1  Flow control: None Then power on the switch. You...

ARKSNT wrote The TL-WBS210 is connected to the Modem Router of my Internet Operator in ethernet, and when I set it as a repeater all my network becomes unstable. If you set repeater mode, it uses the...

M@rius wrote R1D2 do you mean Channel Width in wireless settings ? No, I mean "Channel/Frequency" in wireless settings. Two pairing devices use one channel, the two others use another channel.