The CPE is not in Client mode, it's in Bridge or Repeater mode. In Client mode there is no such submenu: Anyway, ping works for me in Client and Bridge modes, with /16 subnet mask, WDS On or Auto. I...

At least make sure you use proper cable (24 AWG or better), not cheap patch cable if powering any passive PoE device over only two wires. Four wires are used to keep the power loss small.

If your gateways DNS is slower than Google DNS, it is either doing a recursive lookup (small time difference only) or probably overloaded at the ISP (huge time difference). Usually, ISPs set up...

AINEMORF wrote It seem to be correctly aggregated but I can see this speed when I move data from PC1 to PC2. Can be a reason? Could I check something on the switch? You selected SRC IP + DST IP as...

Encryption works on my CPEs, but you need to wait somewhat until CPEs re-sync after WiFi settings have been changed. Best is to set up the devices and save the config before finally mounting them in...

Which country are you from? In the EU and Canada the U-NII-1 subband (channels 38 to 48) and U-NII-2A (channels 52 to 64) are allowed only indoors U-NII-2A with reduced TX power also partially...