TP-Link wrote Case 1: With MR600 on the wireless router mode, with DHCP enabled, but LAN-to-LAN connected to the main router. The wired devices connected to the MR6400, are getting an IP address from...

Wish i had kept some screenshots more detailed.. i ll work on it, retry settings and keep screenshots etc.. My main router is an AF510 arrow fibre provided by my ISP (actually is JMData), all ip...

@TP-Link i ve notices some unexpected things and thought about sharing.. TL-MR6400 was working fine as access point most of the time (at least i thought so), but i noticed that with some devices dhcp...

@TP-Link cable from main router(192.168.100.1) at lan port & working(very well) as access point, dchp enabled(not sure for that anymore) on mr6400, ping request time out (but i will check again to...

@TP-Link thanks for the reply It's working as access point since the last post with no problem, except that i cant access the menu.. i set up a static ip address in mr6400, also i reserved the same...

After a lot of testing i managed to make it behave like kind of access point.. When cable(from the main router) is connected to LAN/WAN port it behaves like a router no matter what, if i set it up...