@Alex Hi there, I also have the firmware 1.1.0 of ER7206 for one month and there has no DHCP issue with this firmware. My firmware is from the TP-Link engineer directly. Not pretty sure if you are...

@paderijk Sounds good with this advice

@elderf The NAT throughput is 95Mbps for this router, it is advised to use iperf to check the NAT Throughput. This instruction tell us the different of speed test and the iprerf test....

@bdl Hi there, are you using the Controller mode to manage these two switches, or use the Standalone mode? In the Standalone mode, we can change the system priority and the modes of port(active or...

@MarkDC7 Hi there, if you only have this switch, it cannot be managed on the APP. Cause the APP needs to bind a hardware controller OC200, then log in the OC200's page on the APP to manage the other...

@Ninja365 Hi there, is your current network working as CPE1)))((CPE2--EAP? After that what you want to do is as follow: CPE1))((CPE2--EAP))((CPE 3? It has no issue if you want to set up like that. By...