@deansmylie You need to be with a FW version which supports OneMesh - check this post. Be sure you're updating with the correct FW for your device - check the device bottom label for HW version and...

@Saad.. It's best to take a look at the bottom sticker of the device to determine the HW version and FW region to be sure before upgrading the device FW - here' s a guide. For some reason the US...

@jpeck Disabling device remote management: If you want to block access to any application from the WAN port to your internal network delete any virtual servers configured: And disable DMZ as well:

@Avitron142 Have you rebooted the device to see if it can start normally ? If that doesn't help try start the Wi-Fi by the back button: If that doesn't help either reset the device to factory default...

@Utkarshj What's the make and model of the host router ? If you haven't, turn the SmartConnect off. When WDS is successfully built, it's status should be RUN - here's a guide. Try moving devices...

@ku4eto AX10 doesn't support LACP. Probably it's just a universal WebGUI guidance for AX series devices. It's highly unlikely this model will receive a FW upgrade with LACP feature since it's an...