@Stiols So when you're on rental VLAN there's no problem with accessing both APs WebGUI, but when you're on your personal VLAN you receive Error 403 only on AP2. Their both LAN networks have been...

@Stiols In your first post you mentioned Error 404 which is 'Not Found". Thta's why I suggested a routing problem. Now Error 403 is different matter - " This status is similar to 401, but in this...

@Stiols You didn't mention from which network you are trying to access the APs. A detailed description of your network infrastructire would be helpful. For example, If you are connected to the...

@emdub2112 If you have hardwired the 3-rd floor then an additional AX3000 in AP mode (Case 1) would do the job.

@Mohit02 It could be many reasons for failing to build the WDS. The main router wireless channel should be static (not Auto). For wireless security settings on your main router use these: The...

@Mohit02 If you want to configure A6 as an AP follow this guide - Case 1. A6 LAN ip address should be in the same subnet as the ISP router LAN IP address. Also A6 DHCP server should be disabled....