@Enzofielt The EAP225-Outdoor device firmware is only compatible with Omada controller v4.1.5 or above. The FW version for the other three EAP245 is for Omada Controller v3.2.6 or above. You can try...

@YulianNYC If you're trying to configure WDS on TL-WR940N v3 use this guide. After finishing the configuration reboot the device and test. You can go to Status > Wireless to check the WDS status....

@tplnkuser101 With TL-WR841N/ND type of Access Control and to be dual band you don't have many choices, but still you can choose between Archer C20 and Archer C50. Keep in mind that even they are...

@PBSmile In general 'mesh' means that the units are wirelessly connected - EAP Mesh FAQ Q1/A1. Deco solution can use an existing LAN ifrastructure to deploy an ethernet backhaul. It's the same with...

@GSTLeslie Probably the WAN IP address of your TP-Link is not a public one, despite the fact that the ISP router is in bridge mode. Check and see if that's the case. Here's a list pf private IP...

@Frankie_Siow What are the devices connected to AX90 LAN 2 and LAN3 port ? Are they 1000 mbps capable for sure ? When you do the speedtest connected to the LAN1 port (which shows 1000 mbps), does...