@JSchnee21 OK so I thought I'd give it wone more chance. I factory reset the Outdoor and checked my indoor channel setting. The outdorr unit is defaulted to Auto and the three indoor units are set to...

@JSchnee21 Thanks for all the help and suggestions. The garage is masonary (single skin brick) so that might be an issue, although it is only 3m from the house and the nearest AP is about another 5m...

JSchnee21 wrote Hi @BD1, How far away is the building? If not too far (less then 200 meters) then mounting an Ethernet connected Outdoor EAP on the outside of each building would be best. But if the...

JSchnee21 wrote Hi @BD1, While Doc2485 is generally correct, I have a similar setup to you (2x EAP225V3 -- hardwired) and one, soon to be two, EAP225-OD via MESH. My experience has been generally...

@Doc2485 Agree 100%. I use wired wherever possible but the outdoor eap is in a detached building so I'm not digging a trench to get cable there when I can buy a product that is supposed to solve the...

I have 3 EAP225(EU) v3 wired access points and one EAP-225 Outdoor v1 connected by mesh. They are controlled by an OC200 hardware controller. The EAP225 Outdoor regularly (every few days) goes...