AK-Wizzy wrote @forrest To say i am disappointed with this EAP225 product is an understatement. I have been battling this same issue since joining my current company in 2018, and currently i am still...

So after resetting the isolated EAP several more times, I can now see the default SSID and the EAP was showing as "Pending" in the Controller. I was able to adopt it again, phew. What an ordeal.

R1D2 wrote Hi dasfrank, Omada Controller should be on the side of the wired LAN. In your diagram, Omada Controller resides on a client connected wirelessly to the mesh EAP. This can't work. Omada...

@Fae Do you mean the mesh EAP would turn to "Isolated" status (or it just disappears completely from the Controller) every time the power supply is lost? The mesh EAP would disappear completely from...

Hello, I have two EAP225-Outdoor in mesh mode (see diagram below), which was working well for awhile but every time the isolated AP loses power, it's such a big hassle just finding it and getting it...

@forrest thanks for your reply. I had a follow-up question: is it possible to have a switch on the receiving side of the EAP? Something like this but with multiple PCs/devices connected to the...